orcase 0 Posted September 29, 2010 Never had this before. I have mounted a couple of PTZ domes (CCTV600) out in the sticks, and they get noticable camera reflection of the Cam body/mechanism in the dome cover. Tried a silver effect and clear, silvered was very bad. Anyone got any tips how to combat this ? Share this post Link to post Share on other sites
shropna 0 Posted September 29, 2010 Never had this before.I have mounted a couple of PTZ domes (CCTV600) out in the sticks, and they get noticable camera reflection of the Cam body/mechanism in the dome cover. Tried a silver effect and clear, silvered was very bad. Anyone got any tips how to combat this ? Just analyze, what the difference between previously installed domes, and now installed. Maybe, distance from lens to dome surface is bigger? Just add a "tube" on lens. Share this post Link to post Share on other sites
orcase 0 Posted September 29, 2010 Sorry, they are new units/new install. Its placement is pretty open, so it does get bright, but it still shows reflection when overcast too. I wondered if anyone could recommend some anti-glare coating as no darker shade of dome is available. Good idea about the tube though, might work, will look into it, thanks. Share this post Link to post Share on other sites
