ACTi ACM-3401 Remote Access

[Kevin L 0]

Hi, all.

 

I set up a new ACM-3401. I don't have a problem viewing the video on my local network, but cannot view remotely. It's not an access issue. I have port forwarding set properly, and can login to the camera, make setup changes, etc. The video just won't appear. I've installed the ActiveX control and tried both MPEG4 and MJPEG. Neither will appear on the laptop remotely. If I plug the same laptop into my LAN, I get a picture. It's pretty frustrating, especially since I don't have this problem with my Panasonic or IQEye IP cams.

 

System Log:

00000000003:Firmware Version A1D-220-V3.12.15-AC

00000000003:GpioDetection:System Type:Standalone, Channel=1, 0xd160

00000000003:Bootloader Version BOOTLOADER-220-V01.10

00000000003:Load device driver modules

00000000005:Profile ID MT9M131-RA5_V090923A

00000000007:Found User Configurations

00000000007:WAN speed = 0

00000000008:Hostname Garage

01285337153:Starting Streaming Server

01285337153:Devcap Version NONE

01285337155:httpd started on 1360

01285337155:DNCtrl Version NONE

 

 

Thanks for any help,

 

Kevin

[bpzle 0]

I have port forwarding set properly

 

 

Probably not... You must forward multiple ports with ACTi. Which ones did you?

[Kevin L 0]

Poor choice of words. I was trying to point out that I understand port forwarding. Thank you for your post. I see that there are two other ports that need forwarding. Once I did that, it works fine.

 

The ACTi is a decent camera, but the documentation needs work. I much prefer my IQEye cameras, but the ACTi works for a garage camera.

 

Thanks for your help!

 

Kevin