cctvsolutions 0 Posted October 7, 2010 Hi all, I am having problems with the NV5000. I am using a Gigabyte GA-G41M-Combo mainboard with a Intel G41 Chipset. I am using Windows7 Home Basic. The version of NV software is 7.7.0.0055SP3. According to the supplier it is all fine to run it like that but the machine keeps freezing. Can anybody assist me with this problem. Angus Share this post Link to post Share on other sites
tomcctv 190 Posted October 7, 2010 Hi all, I am having problems with the NV5000. I am using a Gigabyte GA-G41M-Combo mainboard with a Intel G41 Chipset. I am using Windows7 Home Basic. The version of NV software is 7.7.0.0055SP3. According to the supplier it is all fine to run it like that but the machine keeps freezing. Can anybody assist me with this problem. Angus Hi angus. if you are not using more than 4 ip cameras then i would use 7.5.0.0017 software. see if that works. also on that card you need a watchdog cable from card to motherboard if you need the software let me know by pm. Share this post Link to post Share on other sites
destro_23 0 Posted October 7, 2010 what is freezing? is there any errors in the windows error log? Share this post Link to post Share on other sites
cctvsolutions 0 Posted October 11, 2010 The cameras are freezing and you cannot do anything with the software apart from restting the pc. That is the problem, there is no logs in windows or the NV software. Share this post Link to post Share on other sites
