wheel18 0 Posted October 15, 2010 Hello, Yesterday I've tried to setup a EasyN FS-603A-M106 camera and I faced the same problem... The camera works properly when connect by cable to the router. I configure and activate the wifi settings (web, MAC control acces, port forwarding, etc...), but when I disconnect the network cable I loss the camera ... So I only could operate the camera in the wired mode. Any idea what could be the problem? How to solve it? thanks in advance. Share this post Link to post Share on other sites
wheel18 0 Posted October 16, 2010 Hello Tony, Thanks for the reply... Everything is set properly (SSID, EWP key, etc...) I´ve some devices connected in the wifi lan without problems, but for this camera I really dont understand what could be wrong ... The website is down... Could you, please, give me an aditional help? Thanks Share this post Link to post Share on other sites
wheel18 0 Posted October 16, 2010 Hello, Today I've disabled the encryption and opened completely the wireless security. but, unfortunately the problem remains...Without network cable I've no camera conection (i.e. wireless is dead ). Definetely, this camera must have a special/tricky procedure to connect via wireless or I've have a broken unit or this is a big s**** and I must return it asap ... Seams not probable to me but could by any incompatibility between the router (MSI 54M) and the camera?! Many thanks. Share this post Link to post Share on other sites
wheel18 0 Posted October 18, 2010 Hello, Problem is solved... The camera manual refers WEP encryptation support... The camera configuration software have the WEB encryptation support option... But seams that camera software dont support WEB encryptation ... I've changed the encryptation (router + camera to WPA) and the problem has solved. Thanks for the support. Share this post Link to post Share on other sites
grazor 0 Posted February 1, 2013 Hello, Problem is solved... The camera manual refers WEP encryptation support... The camera configuration software have the WEB encryptation support option... But seams that camera software dont support WEB encryptation ... I've changed the encryptation (router + camera to WPA) and the problem has solved. Thanks for the support. Can help me. How did you change the encryptation to WPA in the camera software? Thanks for an answer Share this post Link to post Share on other sites
