cassiusfrance 0 Posted October 31, 2010 I HAve problems connecting a LG Dome model LT703N-B 27x to a Joystick SVAU40EVT Mini Economical Control Box for Pan/Tilt/Zoom Devices, i try with 9600 baudios and protocol PELCO D, i put a adaptator RS-232 to RS-485 but i dont have control, what can i do? Share this post Link to post Share on other sites
Soundy 1 Posted October 31, 2010 You have to make sure the match the camera ID number, for one thing. I assume you have BOTH camera and joystick using 9600 baud? TX+ on the joystick to RX+ on the camera; TX- to RX- ? Many cameras have an on-screen display when they start up, listing their various communication settings... look for that to confirm the camera's actual settings. Share this post Link to post Share on other sites
SEANHAWG 1 Posted January 13, 2011 Try a lower Baud Rate too if that doesnt work. I bought a cheap Mini Controller a while back and I couldnt get it to work on anything but 2400 Baud Share this post Link to post Share on other sites
