hd086 0 Posted December 3, 2010 dear members i have a project with 30 IP camera all connected to one NVR and monitoring station the distance between the cameras and NVR will be from 200 m to 1.5 km so what should I do? and how can I connect them? should i use switch between the camera and NVR because of the high distance? and please aif you can advise with diagram Share this post Link to post Share on other sites
Campbell 0 Posted December 5, 2010 dear membersi have a project with 30 IP camera all connected to one NVR and monitoring station the distance between the cameras and NVR will be from 200 m to 1.5 km so what should I do? and how can I connect them? should i use switch between the camera and NVR because of the high distance? and please aif you can advise with diagram Cat 6 is only tested to 100m and the data transmission gets pretty sketchy after that. I hope you've got a fibre link in there, otherwise it's a wireless solution. Share this post Link to post Share on other sites
ipcamerastoreusa 0 Posted December 6, 2010 You have to use optic cable to cover such a great distance! Share this post Link to post Share on other sites
tomcctv 190 Posted December 6, 2010 dear membersi have a project with 30 IP camera all connected to one NVR and monitoring station the distance between the cameras and NVR will be from 200 m to 1.5 km so what should I do? and how can I connect them? should i use switch between the camera and NVR because of the high distance? and please aif you can advise with diagram it would be far better for you if you get a company in to do it. 30 ip camera install ......... its going to cost you money in mistakes. Share this post Link to post Share on other sites
bpzle 0 Posted December 6, 2010 dear membersi have a project with 30 IP camera all connected to one NVR and monitoring station the distance between the cameras and NVR will be from 200 m to 1.5 km so what should I do? and how can I connect them? should i use switch between the camera and NVR because of the high distance? and please aif you can advise with diagram it would be far better for you if you get a company in to do it. 30 ip camera install ......... its going to cost you money in mistakes. +1 Share this post Link to post Share on other sites
Voipmodo 0 Posted December 7, 2010 If you have power available at the camera location and need to worry about data, your choices are fiber or dslam, or wireless. dslam works over twisted pair or coax and will give you up to 1.5 miles. DSLAM is the same technology the phone company uses to send dsl to your home or business. Zyzel makes some multi port dslam switches and you would just need to put a dslam adapter at each camera. Share this post Link to post Share on other sites
thewireguys 3 Posted December 8, 2010 Did you just recommend a HUB? Share this post Link to post Share on other sites
thewireguys 3 Posted December 11, 2010 Did you just recommend a HUB? hub or Switch with optical fiber..........dear Best Regards Lucy Lu / A hub for a IP camera system let alone a 30 camera system.... You have got to be kidding Share this post Link to post Share on other sites