IP camera looses video data on viewing PC

[praveensg 0]

We have installed 5NOs of 2100HD 4MP Sanyo camera and connected connect the netgear FS116PoE , the cameras will work for some time then loose video signal.After some time the signal will come again.The problem comes on all 5 camera alretntively andsome time 2or 3 camera looses video signal at time.

Is it coz of video singal clogging .what could be the reason can anyone advise me. We tried cahning hte poe siwcth with another model but still the problem is repeated.

Can this fault be due to the data port to PC not in 1000mbps?

[thewireguys 3]

What VMS software are you using? What is your bandwidth going into the server?

[Soundy 1]

Port saturation is a good bet... there's also a good chance the switch itself can't handle the traffic. I'd suggest trying a Cisco SFE1000P switch - 8 10/100 PoE ports and two gigabit ports. Make sure your PC has a gigabit NIC as well.

[hardwired 0]

Try updating the firmware, the original firmware has trouble even with keeping a single IE browser session open, with no other cameras connected.

 

I have had much better luck with them after updating the firmware (they are a great camera, overall)

 

Sanyo tech support can give you a login for their FTP site (CoreFTP seems to work well for a client, on their site)

[praveensg 0]

What VMS software are you using? What is your bandwidth going into the server?

 

we have installed the milestone software

[praveensg 0]

Now i tried giving manual power instead of Poe to one of the cam .Then the one cam image was not loosing the image.Rest all over cam images was loosing image after some time of operation.SO could anyone advise me if its Poe Problem.But I still used another model from Netgear which was a managed switch but still the problem occured.

Have anyone faced this embarrasing situation.

Please help me

[thewireguys 3]

Upgrade the firmware.