eaglekeeper 0 Posted December 10, 2010 I recently purchased 10 Bosch 0938/25C Envirodome cameras for $100 and I want connect one or two of them to my home computer. I have no CCTV experience and I've contacted Bosch about this and the only answer I got from them is to refer to the users manual on their website, which doesn't help at all. Could some please help me? Do I just need to purchase a BNC DVR card and install in my computer and download some software to control them up the cable? Any help anyone can provide will be greatly appreciated. Share this post Link to post Share on other sites
tomster 0 Posted May 17, 2011 You need three things.... 1.) An autodome (biphase) controller to control the PTZ portion of the camera (LTC5136) 2.) A 24 V power supply to power each dome (50 VA per camera if you use the heater) 3.) A DVR (or capture card if you want to use a PC instead) with as many channels as you want to have cameras. Hookup is very straitforward. Find the manual online for your autodome camera and follow the instructions. Share this post Link to post Share on other sites
