dsheli 0 Posted December 23, 2010 Hey guys Happy Holidays! I have been a long time reader but never posted. I have run into a little bit of a problem and need some help trying to get this to work. Currently I have two HID iClass reader/keypads that have been setup with conventional 26 bit wiegand cards. Presently I would like to use a bucket of iclass fobs that I recently acquired. Only problem is they are 37-bit and thus when scanned in the reader they do not show up on win-pak or the invalid card read. Is it possible to use 26 and 37 bit cards on a system or do I have to pick on or the other? If I choose to pick the 37 bit how would I go about getting it setup in winpak? I converted the panels over to 12 digit cards and when I do that each time a 37 bit fob is presented the panel reads, card number 000000000000 "invalid site code" which I thought based upon the winpak manual that the system does not look at site codes when in 12 digit mode? Thanks for the help! David Share this post Link to post Share on other sites
GAETEN 0 Posted September 17, 2011 Hi David I will suggest you to look at the card box lebel, on this one you will se if its a 37 Bit with site code or with out, from their that will be more simple to solved it. Gaeten Share this post Link to post Share on other sites
