torbenc 0 Posted January 4, 2011 It's Vista VPC9032 I found a picture of the back: Share this post Link to post Share on other sites
tomcctv 190 Posted January 4, 2011 It's Vista VPC9032 I found a picture of the back: you still need to focus the camera as normal. page 7 is what the connections are for http://www.norbain.co.uk/downloads/manuals/Standard_protos_multi_lingual.pdf Share this post Link to post Share on other sites
jeromephone 6 Posted January 4, 2011 If we are doing several cameras we put a 14 " monitor on a cart get a 10' patch cord and look at the monitor from the ladder. You can come pretty close with few trips up and down. It takes cords and power outlet but it sure is better than the call and challenge method. We have found that focus at the camera can be a little different than at the dvr on longer runs. Share this post Link to post Share on other sites
torbenc 0 Posted January 5, 2011 I have tried to get the web-viewer to work on my Android phone, with no luck. In the standard browser, and Firefox, it shows the webclient fine, but not the login screen. The CCTV software, supports other programs to log in, and stream the video signal, but I have not found any apps for android, supporting this. Any ideas ? I took apart the 7" TFT monitor I had, and today I will try to get the signal on it. It has a flatcable input, and on the PCB they are marked as eg. "Video" "DVD" "+" I suppose that I will have to put the plus signal from my Powersupply on +, and Ground on the common ground on the PCB. And the same with the videosignal. The LCD only uses 3-4v input, so I can easy make with no wired powersupply. Share this post Link to post Share on other sites
