tlavite 0 Posted January 14, 2011 I recently got a Dynacolor Dynaguard 216L DVR off of bay for 200 bucks. It is in amazing shape and works great (way better then my crappy chines off brand DVR card with crappy PC) I have two questions. Number one does anyone know where I can find the users manual for this DVR. Number two my DVR has 16 alarm inputs (its a 16ch DVR) well the alarm inputs/outputs terminals are only labeled 1-16 and 17-32. I have a NO alarm on CH1 the wires come from terminal 1 and terminal 17 (directly above 1) when i press the wires together it triggers the alarm. Now if i set a NO alarm for CH2 by using terminals 2 and terminal 18 (right above number 2) but when there touched together it does not trigger an alarm. I have also tried terminal 2 and terminal 17 but still no trigger. My main question is does anyone know the pinout of the terminals on a dynacolor DVR because I cannot get any other alarms to work besides CH1. I also need help finding out which ones are the alarm outputs I should have two outputs. If anyone could help me figure this out it would be greatly appreciated. Thanks! Share this post Link to post Share on other sites
danger_e 0 Posted January 18, 2011 Were you able to find this manual? If not I have one around here, PM me and I will send it over to you. Share this post Link to post Share on other sites
