ght3k7 0 Posted January 16, 2011 Hi my friend, I have a question please. I have a CCTV DVR, And I want to use Iphone to remotly access to it. The probleme that I don't have the model of DVR, and I don't have any vesion information on the his management board, so I don't know which Iphone app to use attached a screenshot of IE remote management interface of this DVR. Do you have any idea? thanks NB : Video Frame is displayed by Quicktime. Share this post Link to post Share on other sites
rory 0 Posted January 16, 2011 Its an AvTech DVR It used to be Java and ActiveX mixed though, not sure about the quicktime. Either way worst quality over the network Ive ever seen from any DVR. Share this post Link to post Share on other sites
ght3k7 0 Posted January 16, 2011 How can I find whitch model is it ? And witch Iphone app can I use with it ? thanks by the way, I agree with you regarding the quality of this DVR Share this post Link to post Share on other sites
tomcctv 190 Posted January 16, 2011 Hi my friend, I have a question please. I have a CCTV DVR, And I want to use Iphone to remotly access to it. The probleme that I don't have the model of DVR, and I don't have any vesion information on the his management board, so I don't know which Iphone app to use attached a screenshot of IE remote management interface of this DVR. Do you have any idea? thanks NB : Video Frame is displayed by Quicktime. http://www.appolicious.com/finance/apps/85156-eagleeyes-avtech Share this post Link to post Share on other sites
ght3k7 0 Posted January 25, 2011 thanks a lot for your response. A last question: I have this DVR, but I dont have a Monitor, I use just à PC (on a switch) to get this web interface and configure it. In fact, I made a stupidity: I changed the IP configuration of the DVR from the factory Fixed IP(192.168.1.10) to DHCP. So now, I can't get access to DVR anymore. Do you know how the get the DVR back to the factory configuration (make a factory reset) ? I tried to remove battery that is inside the DVR and put it again after a minute, but it doesn't get back the default IP configuration (it just changes the time configuration I suppose) thanks Share this post Link to post Share on other sites
tomcctv 190 Posted January 25, 2011 thanks a lot for your response. A last question: I have this DVR, but I dont have a Monitor, I use just à PC (on a switch) to get this web interface and configure it. In fact, I made a stupidity: I changed the IP configuration of the DVR from the factory Fixed IP(192.168.1.10) to DHCP. So now, I can't get access to DVR anymore. Do you know how the get the DVR back to the factory configuration (make a factory reset) ? I tried to remove battery that is inside the DVR and put it again after a minute, but it doesn't get back the default IP configuration (it just changes the time configuration I suppose) thanks Hi your dvr will not come with a factory ip address it collects it from your router. you are best connecting your dvr up to a monitor and switching off DHCP and re entre your ip 192.168.1.10. if you dont do this then you will need to do all your ports on your router to get your remote mobile viewing. Share this post Link to post Share on other sites
gandy 0 Posted January 26, 2011 thanks a lot for your response. A last question: I have this DVR, but I dont have a Monitor, I use just à PC (on a switch) to get this web interface and configure it. In fact, I made a stupidity: I changed the IP configuration of the DVR from the factory Fixed IP(192.168.1.10) to DHCP. So now, I can't get access to DVR anymore. Do you know how the get the DVR back to the factory configuration (make a factory reset) ? I tried to remove battery that is inside the DVR and put it again after a minute, but it doesn't get back the default IP configuration (it just changes the time configuration I suppose) thanks Hi your dvr will not come with a factory ip address it collects it from your router. you are best connecting your dvr up to a monitor and switching off DHCP and re entre your ip 192.168.1.10. if you dont do this then you will need to do all your ports on your router to get your remote mobile viewing. good reply.it help me too. thx Share this post Link to post Share on other sites
rory 0 Posted January 26, 2011 good reply.it help me too. thx Did it really? Can you give us your opinion? Thanks. Share this post Link to post Share on other sites
nester 0 Posted January 26, 2011 Unless you've accidentally selected DHCP in the AVTECH, it won't ever default to DHCP. Hook a monitor up to it, it's not that big of a deal. As for the iPhone thing, use Eagle Eyes or IP Camera Viewer. Share this post Link to post Share on other sites
