bob the b 0 Posted June 11, 2005 Is it possible to wire a ptz to a stand alone for control and then wire it also to a dvr card,2 systems with control? I have a few 10 core alarm cables already in place ,is this cable suitable? Share this post Link to post Share on other sites
baywatch 1 Posted June 11, 2005 We have run ptz cameras using both the manufacturers keyboard & Geovision system at the same time. Depending on the camera type & maker you should be able to daisy chain the cameras, you should only need 2 wires for most cameras (we use LinLin). Share this post Link to post Share on other sites
jsimon 0 Posted June 13, 2005 I tried this with lilin and it works, but still having some problems, doesn;t repond as I was specting, but with Pelco protocol D, I could,t, I have to use either the joystick ir the geo system, if I have conected the joystick the geo system doesn't work. I was thinking in add something like a relay that always close the joysthick unless you use it. I f some one has an idea it would be very welcome or if you already have something like this working please helpme. TIA Share this post Link to post Share on other sites
