RAN55 0 Posted February 6, 2011 Hi, I have an aesun dvr and I try to login with a Dvr Remote desktop. I try many configurations without sucess. My DVR login is: And Dvr Remote desktop Any chance to login on dvr with Dvr Remote desktop? Thank you for your support. Share this post Link to post Share on other sites
SEANHAWG 1 Posted February 6, 2011 it looks like you need to change the DVR port on the desktop to 5050 Share this post Link to post Share on other sites
RAN55 0 Posted February 6, 2011 Hi, Thank you for your quick help. I have my router setup like this: DVR - Port: 80 DVR - Command Port: 5050 DVR - Media Port: 6050 DVR - Mobile Port: 7050 When you say to change the DVR port on the desktop to 5050 is the DVR - Port: 80 to DVR - Port: 5050? Thank you for your help Share this post Link to post Share on other sites
SEANHAWG 1 Posted February 7, 2011 Yes, in your second picture for the desktop software, you will need to change the port from 80 to 5050. See if that helps. Port 80 is your HTTP port. Port 5050 is your command port. Change the port in the second picture to 5050. Also, the IP address in your second picture in a LAN IP which means you must login from the same network that your DVR is located in. Have you been able to login to your DVR from a remote location over the internet? Share this post Link to post Share on other sites
RAN55 0 Posted February 7, 2011 Hi, Already try make this but dosen't work Thank you for your help Share this post Link to post Share on other sites
SEANHAWG 1 Posted February 7, 2011 Did you set up your router correctly. Can you post a screen shot of your routers configuration page? Share this post Link to post Share on other sites
RAN55 0 Posted February 8, 2011 Hi, My router config: Thank you for your help Share this post Link to post Share on other sites
SEANHAWG 1 Posted February 8, 2011 Hmmmm. I understand that you cannot login to your desktop software, but can you login to the DVR through the internet explorer? The one that you show with this picture? If not, i sent you a PM that might help. Share this post Link to post Share on other sites
RAN55 0 Posted February 8, 2011 Hi, Thank you for your help. I can access with IExplorer without problems. My only problem is try to access with a software like Dvr Remote Desktop. I like to have something like Dvr Remote Desktop to see the cctv cameras in my desktop with a soft an small window software. Share this post Link to post Share on other sites
SEANHAWG 1 Posted February 8, 2011 Okay cool. One question though. Did that desktop software come with your DVR? If not, it may not be compatible. Share this post Link to post Share on other sites
RAN55 0 Posted February 8, 2011 No, this desktop software not come with my DVR Is possible change the firmware of the DVR with another? Share this post Link to post Share on other sites
SEANHAWG 1 Posted February 9, 2011 Sometimes, but not always. Its best to use the desktop software that came with the DVR if possible. PM me your email address and I can send you something that may work. Share this post Link to post Share on other sites
cctvindo 0 Posted February 9, 2011 Sean I have 9 channel mp4 china dvr that get cd with software name net back.zip This software function is to back up from network. But the cd is bad that cannot read the file. If you have can you help to share the software? Thank you before Share this post Link to post Share on other sites
SEANHAWG 1 Posted February 10, 2011 I'm not so sure if my desktop software would work with all DVR's. Share this post Link to post Share on other sites
rory 0 Posted February 10, 2011 thats an AvTech DVR Share this post Link to post Share on other sites
