rucanunes 0 Posted April 7, 2011 I have Sony cameras. Pelco D, 2400. My cameras are about 5 meters from the DVR and connected with double wire. I've setup my cameras with Lupus Aeon DVR LE800 and all seems to work fine, but not PTZ over iPhone 4. - I can access and PTZ cameras via PC (home network) app DVR Remote Desktop. - I can access and PTZ cameras via PC (Internet - Remote) app DVR Remote Desktop and IE8. - I can access video from the cameras via iPhone 4, both Home Network and remotely via Internet and 3G using scDVR - I can NOT move cameras (PTZ) via iPhone 4, both Home Network and remotely via Internet and 3G using scDVR. Share this post Link to post Share on other sites
tomcctv 190 Posted April 7, 2011 I have Sony cameras. Pelco D, 2400.My cameras are about 5 meters from the DVR and connected with double wire. I've setup my cameras with Lupus Aeon DVR LE800 and all seems to work fine, but not PTZ over iPhone 4. - I can access and PTZ cameras via PC (home network) app DVR Remote Desktop. - I can access and PTZ cameras via PC (Internet - Remote) app DVR Remote Desktop and IE8. - I can access video from the cameras via iPhone 4, both Home Network and remotely via Internet and 3G using scDVR - I can NOT move cameras (PTZ) via iPhone 4, both Home Network and remotely via Internet and 3G using scDVR. Hi rucanunes. your dvr does not support moving of ptz over iphone. the software is old NV avermedia software. the only way you could do it is download a java program for your iphone 4 . and i will pm you a program that will allow you to move your ptz in java. but there is also a new app comming so you can control Share this post Link to post Share on other sites
tomcctv 190 Posted April 7, 2011 to get JAVA to work on your iphone you will need to download an add on browser. cloud is a good one. then type http:// yourip :5550/JAVA-Viewer.html and you will get full cameras and ptz control. http://itunes.apple.com/us/app/cloud-browse/id394418635?mt=8 Share this post Link to post Share on other sites
rucanunes 0 Posted April 7, 2011 Thank you very much for your help. Unfortunately that app it's only available to the US market. Share this post Link to post Share on other sites
tomcctv 190 Posted April 7, 2011 Thank you very much for your help.Unfortunately that app it's only available to the US market. ok try this just scan amd load from your iphone ... you need a qr app (its free) Share this post Link to post Share on other sites
kaualyman@yahoo.com 0 Posted April 10, 2011 I purchased a PTZ speed dome from ebay(yea learn the hard way)and it didn't have no plugs(6pin green) or the wires(rg-59video,pwr, w/rs485) that come out of the camera. Does anyone know where to get these plugs or wires? I dont want to just put anything together I want something pre made like what came with the camera. The guy I got the camera from was no help as the manufactors website is no longer available. any help would be a plus as I'm tapped trying to find them locally or online. thxs Share this post Link to post Share on other sites
ak357 0 Posted April 10, 2011 Do not hesitate to contact us if you have any further demands, qustions or needs. Our support team will be there for you Lupus-Electronics® GmbH Lise-Meitner-Str. 20 - Gewerbepark - 76829 Landau Tel: +49 (0) 6341 93 55 3 – 0 Fax: +49 (0) 6341 93 55 3 – 20 Working hours: Mo-Fr from 08:30 - 17:00 Uhr I contacted you about 3 weeks ago and no answers yet!! Great support you have.... " title="Applause" /> I have nothing to do with them ! I just give you link Share this post Link to post Share on other sites
rucanunes 0 Posted May 5, 2011 Hi rucanunes. your dvr does not support moving of ptz over iphone. the software is old NV avermedia software. the only way you could do it is download a java program for your iphone 4 . and i will pm you a program that will allow you to move your ptz in java. but there is also a new app comming so you can control Hi, Did the new app came out already? What's the name of it? Raul Share this post Link to post Share on other sites
rucanunes 0 Posted May 26, 2011 Hello? Is that App out already? When I use Bubo Bubo I always get the error: "Could not connect to server. Please try again later". I think that iPhone doesn't even try to connect... Strange and nerve wrecking!!! My settings: DVR Name: Casa 67 Host: 192.168.1.101 Port: 80 Username: user Pass: pass Can someone please help me here? I'm sick and tired of trying to get this thing work with the Lupus LE800. Thanks!!! Share this post Link to post Share on other sites
tomcctv 190 Posted May 26, 2011 Hello? Is that App out already? When I use Bubo Bubo I always get the error: "Could not connect to server. Please try again later". I think that iPhone doesn't even try to connect... Strange and nerve wrecking!!! My settings: DVR Name: Casa 67 Host: 192.168.1.101 Port: 80 Username: user Pass: pass Can someone please help me here? I'm sick and tired of trying to get this thing work with the Lupus LE800. Thanks!!! for apps you need to change your port to 5550 Share this post Link to post Share on other sites
rucanunes 0 Posted May 26, 2011 Tried port 5550 and still can't move cams on scDVR and Bubo Bubo still says: "Could not connect to server. Please try again later. Share this post Link to post Share on other sites
tomcctv 190 Posted May 26, 2011 Tried port 5550 and still can't move cams on scDVR and Bubo Bubo still says: "Could not connect to server. Please try again later. can you pm me your ip with a temp password Share this post Link to post Share on other sites
rucanunes 0 Posted May 30, 2011 Someone? Please? I'm trying to PTZ my cams via iPhone for a bout half a year.. Share this post Link to post Share on other sites
tomcctv 190 Posted May 30, 2011 Someone? Please? I'm trying to PTZ my cams via iPhone for a bout half a year.. Hi this post has been running for a long time did you ask for help ??? Tried port 5550 and still can't move cams on scDVR and Bubo Bubo still says: "Could not connect to server. Please try again later. can you pm me your ip with a temp password Share this post Link to post Share on other sites
SEANHAWG 1 Posted June 1, 2011 email Tom a temp password for gosh sakes. He can get it fixed if you let him. Share this post Link to post Share on other sites
rucanunes 0 Posted June 1, 2011 email Tom a temp password for gosh sakes. He can get it fixed if you let him. I've already did. But no luck! Share this post Link to post Share on other sites
Securame 0 Posted June 1, 2011 Someone? Please? I'm trying to PTZ my cams via iPhone for a bout half a year.. Your time is not worth anything? If it is, maybe it is about time to burn that damn DVR, and get a good one Share this post Link to post Share on other sites
rucanunes 0 Posted June 1, 2011 That's a good way to solve the problem, and you can be sure I've already though on that. But I like the damn DVR... (Maybe I'm crazy?!) Share this post Link to post Share on other sites
rucanunes 0 Posted July 14, 2011 Can you beleive that I'm still working on this? Any new ideas or new app out there? Share this post Link to post Share on other sites
rucanunes 0 Posted September 9, 2011 Someone, please? I still can't find a solution to move the cameras. I tried to use Budo Budo, but with no luck. Can't connect. Tese are my settings and the message I get with Budo Budo: Any ideas or new software? Share this post Link to post Share on other sites
tomcctv 190 Posted September 9, 2011 is this the same problem................. your problem was cant move PTZ with iphone. looking at your screen shot you cant log onto the app. can you pm me your ip. Share this post Link to post Share on other sites
rucanunes 0 Posted September 9, 2011 is this the same problem................. your problem was cant move PTZ with iphone. looking at your screen shot you cant log onto the app. can you pm me your ip. I can login on th scDVR app but can't move the cameras. On the Budo Budo, I can't login. Share this post Link to post Share on other sites
rucanunes 0 Posted September 14, 2011 If I login at http://lupus.dvrdns.org:10001/ with 'test' and pass 'test' I can see the cameras and move them, but when I login at lunaeyes.dvrdns.org with 'temp' and pass 'temp' I can see the camera BUT not move them. I have a Lupus Aeon 800 with PTZ Sony cameras, I think that http://lupus.dvrdns.org:10001/ has the same haedware.... Crappy customer service!!! Sick and tired of this! Can comeone pease take a look and try to help me move the cameras? Share this post Link to post Share on other sites
