shaheen 0 Posted February 16, 2011 Dear Friends, Am sending the details of the system, CCTV Camera -Pelco Spectra mini (analog) NSR(Network Survelliance Server) - Sony IPELA NSR 1200 Software Using - Realshot Manager Advanced V.1.3.0 Model of IP Encoder - Sony SNTEP154 4 Channel Basic Function Blade Encoder The below message is showing on the screen (IT IS SHOWING ON THE ALL ANALOG TO IP CONVERTED CAM SCREENS) PELCO SPECTRA MINI VERSION 1.23.0010 D ADRESS 45 P ADRESS 46 COMM 9600.N.8.1 CONFIGURE FAILED Plz chk this and give me solution for this problem . Thanking you all Shan. Share this post Link to post Share on other sites
Soundy 1 Posted February 16, 2011 "CONFIGURE FAILED" suggests that the camera is failing its startup auto-checks. I'd say it probably needs to be serviced by a Pelco dealer. Share this post Link to post Share on other sites
mmzcheezits 0 Posted July 29, 2011 A little late to answer but, Just for the people that has have this problem. In the event of a "Configure Fail," The Camera usually does a Pan Check on start up and if it should fail... one should try to Pan Left - Right ; Up - Down. If the Camera goes up and down its your Pan sensor, If the camera pans left and right its your "Slip Ring." Share this post Link to post Share on other sites
