Jump to content
Sign in to follow this  
caretaker

Sprite 2/ Dynamic 16 Pro image quality

Recommended Posts

Hi Folks

 

We currently have a 25 camera set-up on 2, 16 channel units.

one is a Dedicatedmicros Sprite 2 (seven years old or more )imgdmdigitalsprite2plus-1.jpg

the other a Dyn-Pro (six months old).

DYN-16PRO-LG.jpg

http://www.dynamic-cctv.com/TECH/DYN-PRO.html

 

What I would like to know is, should I be expecting to see footage that is recorded as clear as when I look at the cameras live?

 

The reason I ask, is that some of our cameras give excellent live picture quality & some are not as good, but none of them give great playback quality (all cameras are at 25fps)

 

Our recorders are all set to record on all cameras 24/7 and before I dive into the settings menu to make changes, could anyone advise me?

 

For example.

a person walks through a room that has a wide angle camera & you can easily facial detail to recognise the individual. On playback the pic is to pix-elated to recognise the person.

 

Am I expecting to much from the system?

 

Thanks in advance

Share this post


Link to post
Share on other sites

I think you will find that the Sprite 2 only records 60fps across all 16 cameras, might want to tweak and set up on motion recording, this should increase picture quality

Share this post


Link to post
Share on other sites
I think you will find that the Sprite 2 only records 60fps across all 16 cameras, might want to tweak and set up on motion recording, this should increase picture quality

 

Thanks SDM Group

 

The manual states "When multiple cameras are recorded the maximum record rate is 18PPS."

Are they exaggerating?

 

This is just the research stage as I've not had a play with the menu/settings of system yet, but we've had so many incidents that require facial recognition it's forced us to have a good hard look at the quality the CCTV system delivers, As I'm the IT Technician, I seemed to get the job

 

This is the plan (hope I'm right in my thoughts)

I hope the recording quality is set at a low Kb level, then I can increase it and (as you say) set-up motion detection on cameras and reduce fps where I can to help with storage capacity..

 

Does motion detection make searching for the correct incident harder?

Sometimes I have to rewind through an hour or so footage to find the correct moment, so is this the same for recordings using motion detection?

Share this post


Link to post
Share on other sites

The dynamic unit is a real-time D1 unit so check that the settings are at D1.

Also Dynamic stopped selling that unit before christmas

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×