Snowman 0 Posted March 11, 2011 Hi guys, Im new to this forum. What brang me here was a question. I have a client who would like to view his cams from his IPhone 4, everything is set up correctly, he has a static IP and he can see the cams from his PC via internet explorer. On his IPhone when I punch in the IP address I can get to the log-on page, I put in the details, and then it stays blank as it tries to download the Active-X software that it needs to run. I have tried a few different apps to get it going including: - NetCamViewer - iPOLiS Mobile - EagleEyes - TouchCMS - iPDR-mobile none of these works DVR model is a Samsung SRD-470D Any advice would be greatly appreciated Share this post Link to post Share on other sites
imparator 0 Posted April 8, 2011 Hi, you must upgrade your dvr to the newest firmware , and you must set the port to 558 in the iPolis Mobile and of course if you like to see it outside your home network, you must put open your ports open on your router : ports to open : 80 554 558 i think this will help you Hi guys, Im new to this forum. What brang me here was a question. I have a client who would like to view his cams from his IPhone 4, everything is set up correctly, he has a static IP and he can see the cams from his PC via internet explorer. On his IPhone when I punch in the IP address I can get to the log-on page, I put in the details, and then it stays blank as it tries to download the Active-X software that it needs to run. I have tried a few different apps to get it going including: - NetCamViewer - iPOLiS Mobile - EagleEyes - TouchCMS - iPDR-mobile none of these works DVR model is a Samsung SRD-470D Any advice would be greatly appreciated Share this post Link to post Share on other sites
