Sanra 0 Posted June 23, 2005 Recently I installed gv800. Everything is working fine except: sometimes some of the camera is not recorded (can’t recognize time pattern), from card itself is coming noise similar to hand digital watch alarm (Is that normal). Are geovision cards using hardware or software compression? Thanks for suggestions! Share this post Link to post Share on other sites
wahloon 0 Posted June 23, 2005 Is it beeping like a alarm? If so go to the system preference and click on the camera settings and activate the cameras. Share this post Link to post Share on other sites
CCTVINSTALLER 0 Posted June 23, 2005 Geo cards use software compression. However i think the new hybrid card uses hardware Share this post Link to post Share on other sites
Sanra 0 Posted June 25, 2005 Camera are activated,they are recording. Everything is fine exept that noise(alarm clock like)?? Share this post Link to post Share on other sites
rory 0 Posted June 25, 2005 you mean a on and off very quiet digital noise? I thought that was the new motherboard I put it .. like some heat tracking thing, I dont see how the card can be doing that ...? Share this post Link to post Share on other sites
G22 0 Posted June 25, 2005 Video Loss Alarm for cameras you enabled in the settings but don't actually have connected perhaps? Share this post Link to post Share on other sites
baywatch 1 Posted June 25, 2005 We are still testing the Avermedia card with hardware compression & it is stable. Have had a few issues with remote control setting up but Avers in Taiwan seem to have cracked that now. Still can't get 2 way sound however (Avers trying their best to get it working). Have a few concerns that Avers keep blaming our router for the glitches, we have run many systems using our network with no problems. Tried to explain to them that it needs to work on our customers networks that we can't change loads of settings on. Share this post Link to post Share on other sites
wahloon 0 Posted June 26, 2005 how many channels is it? and how many channels do you have camera connected to it? Share this post Link to post Share on other sites
rory 0 Posted June 26, 2005 I gots one question, if all these guys are "mostly" from Taiwan, why dont they all write the same features into their DVR Software?? Dont they even try their competition's products ....!!??? Share this post Link to post Share on other sites
baywatch 1 Posted June 26, 2005 It is a 4 camera unit NV7000 with 1 x audio, cam 2 is a little flakey at the moment. http://dragonvision.no-ip.info:8020 User = cctv pass = cctv We also have the Lilin IP dome still up on http://uplandstavern.servebeer.com:8010 User =demo pass = 123 Share this post Link to post Share on other sites
baywatch 1 Posted June 26, 2005 BTW like Rory, I can't understand why these guys don't look at each others systems & pick the best parts out. They all have + and - features Share this post Link to post Share on other sites
Thomas 0 Posted June 26, 2005 Because reverse engineering has to be done carefully. Do it right and it's legal. Do it wrong and it's very expensive. Share this post Link to post Share on other sites
rory 0 Posted June 26, 2005 why they all just dont buy each other out like they do in the US like Bosch, GE, and Honeywell Cant they all just get along .. ;-( ps. speaking of tird wurld (or were we?!) my power just came back on from last night ....darn! Share this post Link to post Share on other sites
cctv_down_under 0 Posted June 28, 2005 Because reverse engineering has to be done carefully. Do it right and it's legal. Do it wrong and it's very expensive. Oh So TRUE!!!!!!!! Share this post Link to post Share on other sites
