steveqae 0 Posted April 1, 2011 I have a Panasonic WV-CD110 camera and have no idea how to connect it, I would like to be able to display the images on my PC. Can any one help? Steve Share this post Link to post Share on other sites
Soundy 1 Posted April 1, 2011 If memory serves, this camera is powered over the coax, and requires a special Panasonic power supply... if you don't have that supply, you may be SOL. If you do, and the camera is working, then you'll need some sort of video-capture device for your PC - TV-tuner card with composite input, DVR card, USB DVR adapter, etc. Share this post Link to post Share on other sites
steveqae 0 Posted April 1, 2011 No unfortunately all I have is the camera, no power unit. Steve Share this post Link to post Share on other sites
Soundy 1 Posted April 1, 2011 Is there anything on the camera that resembles power markings? The pictures I found online show screw-and-clamp terminals for the coax, and three screw terminals below that... do they have labels at all?? Share this post Link to post Share on other sites
steveqae 0 Posted April 1, 2011 Please see attached photo Share this post Link to post Share on other sites
Soundy 1 Posted April 1, 2011 Yeah, those definitely aren't power connections. To connect the coax, you have to strip it so the center conductor goes under/around the silver screw in the middle, and the shield clamps under the curved clamp at the bottom (see attached photo). To power it, you need Panasonic's WV-PS10a "drive unit". There are several on fleaBay, running around $100-$170. Probably not worth it... Share this post Link to post Share on other sites
steveqae 0 Posted April 1, 2011 Thanks for the info. Steve Share this post Link to post Share on other sites
Sawbones 0 Posted April 2, 2011 Looks like some mighty old hardware. Share this post Link to post Share on other sites
