kmineso 0 Posted April 26, 2011 I have got a security DVR at my store like attachment, but there is no model name shown anywhere. It is 4 channel standalone DVR. The printed circuit board says DVR4A - Ver 1.7. Also IDE HARD DRIVE is WD1200(Jan 12, 2004). There is one Ethernet port at rear face of the DVR body. I need manufacturer dvr software because I have to watch Internet viewing at home. "VER 3.91" is instantly seen on the top of TV screen after power-on of DVR. "CHAMERA LOSS CHECK---O.K." is shown at the bottom of screen. I found PRODUCT ID of "02S-001476-151105-KR-000-009" on SYSTEM SETUP when I opened MENU button. I have been trying to get a solution for 2 weeks after something wrong, but nothing is given yet. Please help me know. P.S.: I will throw it into the dumpster when I don't have any answer. I am going to buy new DVR only because CCTV camera and TV are useful. Is there any problem for connection between new DVR and old camera? Share this post Link to post Share on other sites
lordwood 0 Posted April 27, 2011 Maybe there is no manufacture software! I saw that type of DVR earlier, and no software is provide with it! DVR is using Internet Explorer for remote viewing. - Create port for DVR, for example 88, and do port forwarding at router, and maybe you`ll see picture at your home via Internet Explorer . You need earlier experience to do all that! :-/ There is no problem to use old camera and new DVR! Share this post Link to post Share on other sites
