capedavid 0 Posted April 28, 2011 I need help Looking to identify this board and find drivers for the board for WIN7 Also what software i can use of a dvr on this board Thanks David Share this post Link to post Share on other sites
Securame 0 Posted April 29, 2011 Ahhh, Conexant BT878 chips... For all I know, there's no drivers at all for Win7 for those Share this post Link to post Share on other sites
JohnRH 0 Posted May 4, 2011 Try here http://btwincap.sourceforge.net/ John Share this post Link to post Share on other sites
Birdman Adam 0 Posted May 4, 2011 Will be plug&play in Linux. Share this post Link to post Share on other sites
Nimrod 0 Posted May 5, 2011 “Try here http://btwincap.sourceforge.net/ John” The Btwincap drivers have only partial functionality in Win 7. None of the color, hue, and contrast controls work. Share this post Link to post Share on other sites
JohnRH 0 Posted May 5, 2011 Btwincap drivers have only partial functionality Ah yes forgot about that. But at least you can get an image. Too bad they haven't been upgraded. John Share this post Link to post Share on other sites
Securame 0 Posted May 5, 2011 The Btwincap drivers have only partial functionality in Win 7. None of the color, hue, and contrast controls work. That's not so bad if you got them to work, I tried once and wasn't able to... Share this post Link to post Share on other sites
Nimrod 0 Posted May 5, 2011 The standard btwincap drivers only work with a small range of bt878 cards, for others you have to make custom drivers. There are instructions on how to do this on the web site but i never tried. Share this post Link to post Share on other sites
Securame 0 Posted May 5, 2011 The standard btwincap drivers only work with a small range of bt878 cards, for others you have to make custom drivers. There are instructions on how to do this on the web site but i never tried. I have 3 different models of BT878 cards that I use often under XP (with one chip, four chips, and eight chips). I know how to use BTWinCap with no problems under XP, I just was unable to get them to work under Win7 32bit the one time I tried, so I assumed that the drivers were so old, that it would not be possible to make them work under Win7. I guess I will have to give it another try...! Share this post Link to post Share on other sites
rory 0 Posted May 5, 2011 The standard btwincap drivers only work with a small range of bt878 cards, for others you have to make custom drivers. There are instructions on how to do this on the web site but i never tried. I have 3 different models of BT878 cards that I use often under XP (with one chip, four chips, and eight chips). I know how to use BTWinCap with no problems under XP, I just was unable to get them to work under Win7 32bit the one time I tried, so I assumed that the drivers were so old, that it would not be possible to make them work under Win7. I guess I will have to give it another try...! All that trouble with Win7, might as well try get it to work under Ubuntu, it at least has the desktop cube and its free Share this post Link to post Share on other sites
Nimrod 0 Posted May 5, 2011 “have 3 different models of BT878 cards that I use often under XP (with one chip, four chips, and eight chips). I know how to use BTWinCap with no problems under XP, I just was unable to get them to work under Win7 32bit the one time I tried, so I assumed that the drivers were so old, that it would not be possible to make them work under Win7. I guess I will have to give it another try...!” Do not forget the drivers are only part of the equation. The DVR software must run under win 7 also. But there is nothing wrong with win xp. If i could find a cheap reliable dvr program that ran under xp i would be happy. Share this post Link to post Share on other sites
shaunjvr 0 Posted June 4, 2011 hi i have purchased a pc 2nd hand and had to replace the harddrive and reload xp. Now i have 2 cards with no software and noticed that it is an 4 CH 30 FPS CAPTURE V 2.10 as printed on the pc board. and it got a one conexant fusion 878a processor per board. it a alnet product and even got a dongle with a licence number. I need the drivers for the 2 cards. please help !!!! Share this post Link to post Share on other sites
francisuk22 0 Posted July 16, 2012 Sorry to bring a old thread up, http://www.hauppauge.com/site/support/support_pvr150.html#tabs-2 http://www.multiupload.co.uk/33SNRCZSBR - Mirror Drivers Note: This driver can be used with Windows XP, Windows Vista or Windows 7. Note: This driver can only be used in a 64bit system with less than 4gigs of ram Edit: After searching around i have found that my card "Pico UCC4 Conexant 878A 4-port PCI DVR Card" The software works with the UCC4 cards even if device drivers are not loaded for the cards in Windows. This has been reported to be true for all versions of Pico2000, however, it is verified for version 1.9 that loading of the device drivers are not necessary - Taken from http://wiki.robotz.com/index.php/Pico_Install_Instructions_4_Port_CCTV_DVR_Card searching around i have found http://rapidshare.com/files/217500599/Driver_Pico2000.rar - Found here (You need to translate it if you don't speak portugues http://social.technet.microsoft.com/Forums/pt-BR/winxppt/thread/d9b7a378-98de-4f7a-8902-e58536f4da24 http://rapidshare.com/files/256563814/cd_pico.rar - Maybe this is the CD ??? http://tinyurl.com/PICO2000iso - PICO 2000 security camera.iso (Torrent) Share this post Link to post Share on other sites
