wy-doo 0 Posted May 10, 2011 I have the pss 4.03 software loaded on my mac and I keep getting email sent every hour the subject is mail health test!! how can i make it stop!!!! Share this post Link to post Share on other sites
rory 0 Posted May 10, 2011 Unless its specific to PSS for the Mac there is no email feature in PSS. Check the settings on the DVR, you should remove the email address and uncheck the enable box under Network, Email, to disable it sending email alerts. Check Advanced, abnormality for anything there that is sending email also. Share this post Link to post Share on other sites
wy-doo 0 Posted May 11, 2011 I did check the dvr and can not find anything that would send the email ant other idea!! Share this post Link to post Share on other sites
SEANHAWG 1 Posted May 11, 2011 You could completely remove your email from the DVR if you no longer use the email feature anymore. Share this post Link to post Share on other sites
wy-doo 0 Posted May 12, 2011 I would like to use the email so i know when some one comes in!! NOW WHAT DO I DO Share this post Link to post Share on other sites
seretel 0 Posted May 12, 2011 I had the same problem, but when I did a upgrade to firmware the problem was fixed. Im not sure what the problem whas, but is gone now. Share this post Link to post Share on other sites
rory 0 Posted May 12, 2011 firmware update resets certain sections to default. They need to look for the "Send Email" checkbox in the following areas: Alarm - Local and Net Detect - Motion, Video Loss, Masking Abnormality - No Disk, Disk Error, Disk no space, Offline, IP conflicted Share this post Link to post Share on other sites
t3chsupp0rt 0 Posted May 20, 2011 This is most likely a DVR feature when using email alerts. Certain firmwares will send just a email "health test" every hour to let you know the feature is working properly. Call the dealer or technical support for the DVR I am willing to bet they have a recent firmware that will not send health test's hourly. Just when your event(motion,alarm hd error etc.) is triggered. Share this post Link to post Share on other sites
t3chsupp0rt 0 Posted May 24, 2011 It wasn't there. How to add in more than the allowed 50 max devices (DVRs,NVRs & IP cams) Share this post Link to post Share on other sites
rory 0 Posted May 24, 2011 It wasn't there. How to add in more than the allowed 50 max devices (DVRs,NVRs & IP cams) Edit PSS_Config.ini [Version_Info] ...... DevMaxCount=50 ...... Share this post Link to post Share on other sites
t3chsupp0rt 0 Posted May 24, 2011 It wasn't there. How to add in more than the allowed 50 max devices (DVRs,NVRs & IP cams) Edit PSS_Config.ini [Version_Info] ...... DevMaxCount=50 ...... That's it. " title="Applause" />. Thanks for not making me. Share this post Link to post Share on other sites
rory 0 Posted May 24, 2011 That's it. " title="Applause" />. Thanks for not making me. no prob ... updated .... added an example tweaked skin viewtopic.php?f=3&t=23702&p=155404#p155404 Share this post Link to post Share on other sites
t3chsupp0rt 0 Posted May 24, 2011 That's it. " title="Applause" />. Thanks for not making me. no prob ... updated .... added an example tweaked skin viewtopic.php?f=3&t=23702&p=155404#p155404 Very neat. Think I'll try this on my pss I have about 20 tasks I use a lot. Share this post Link to post Share on other sites
rory 0 Posted May 24, 2011 Very neat. Think I'll try this on my pss I have about 20 tasks I use a lot. Careful though as there is no config or any other buttons. However, if you have a list of tasks, although none of the other system tray menu items work, and will crash the program (as they dont exist in this stripped down version), the tasks part of that menu does work. So you dont even need to put it on start, can just open the tweaked version, then using that menu select the task to start, pause, or switch between them. Share this post Link to post Share on other sites
