rnassar 0 Posted May 25, 2011 I have a PTZ camera that used to work a couple of months ago but now it is not working. I dismounted the camera from the pole and tried connecting the camera directly to the DVR to discard any problems with the cabling.While i was connecting the camera to the DVR i noticed that the video plug of the camera was a cutted. The problem that I am having is that the cable is a mini coax cable and I am having troubles making the BNC plug. I believe that I did it correctly but when I connect the video cable to the DVR, no video is shown. If I connect the video cable of the PTZ camera without connecting the control cables to the DVR, does it have to show video signal? Any recommendations for making the BNC plug correctly on the mini coax cable? Share this post Link to post Share on other sites