PropstotheGast 0 Posted May 30, 2011 Hi there, Just registered and thought I would ask about a problem that has been bothering me for 3 years..... I have an IR camera on a PTZ base that scans back and forth from a pool deck to a parking area...... At night it can see the pool deck fine, then as it crosses the water it loses focus and starts to white out, for instance if a pool float is in the view it will be blurry and bright white, then as it crosses onto the deck again, and a fence into the parking area the view stays blurry and too bright for several seconds.....covering a large area full of cars that occasionally get broken into... Is there an automatic setting that causes this that I can turn off or is it a simple fact of camera operation I will have to circumvent another way? Any advice appreciated, thanks! Share this post Link to post Share on other sites
