ANUPSINGH 0 Posted June 26, 2011 Dear all , Just wanted to tell you all about Port Forwadding for DVR's . Its really very simple first you have to assign a ip to DVR ( 192.168.1.10) & the gateway( 192.168.1.1) in DVR should be same as that in your router of ISP . Login to your Router search for Port forward it maybe in Advance-NAT- Virtual Server . Input the same as anything like CCTV , Select TCP Protocol , Start port & End Port ( Generally 80) & IP as in you rDVR (192.168.1.10). save it , THATS IT the port forward is done. In some DVR's like in case of AVTECH you dont have to do port forward also. Just add the DVR's IP ( 192.168.1.10) in the DMZ section in router & its done. In case of DVR's which dont use 80 as its port we have to do port forward for 2 ports Like in HIkvision DVr the dvr port is 8000 & http port is 80 so we have to do port for both this port differently but with the same ip ( 192.168.1.10) In cpplus the dvr port is 3777 so we have to do port forward for 80 & for 3777 also. Thats all folks " title="Applause" /> Share this post Link to post Share on other sites
