mike_va 0 Posted July 2, 2011 It seems there might be a way to do this, but I'm just not sure how. I'd like it to switch the ICR out at the same time each day. From the menu: "An Event Type is a configuration that describes how and when the unit will perform certain actions. Event types may be set up as Scheduled or as Triggered. Event types are often set up to upload images or video to a specified destination, but they can also send email, activate output ports, and send various types of notification messages. Event types are configured in the Event Types menu. Many event types require an Event Server for their function. These servers are used to receive uploaded Motion JPEG images or event notification messages. Configuration is performed in the Event Servers menu." Thanks in advance, Mike Share this post Link to post Share on other sites
drvcrash 0 Posted July 4, 2011 here is how i do it on my q1755 Share this post Link to post Share on other sites
mike_va 0 Posted July 4, 2011 here is how i do it on my q1755 Thanks, still cannot get it to work though. Here's what I've put in for the server, am I missing something somewhere? .../axis-cgi/param.cgi?action=update Share this post Link to post Share on other sites
drvcrash 0 Posted July 4, 2011 i didnt think i had anything for event server but it seem i did http://x.x.x.x/axis-cgi/com/ptz.cgi? Share this post Link to post Share on other sites
mike_va 0 Posted July 5, 2011 i didnt think i had anything for event server but it seem i did http://x.x.x.x/axis-cgi/com/ptz.cgi? Tried that but still can't get it to work...maybe it will make sense tomorrow. Share this post Link to post Share on other sites
drvcrash 0 Posted July 5, 2011 the way i trouble shot mine was to just type the full url into the broswer until i got one that worked Share this post Link to post Share on other sites
mike_va 0 Posted July 6, 2011 the way i trouble shot mine was to just type the full url into the broswer until i got one that workedThanks, I'll keep playing with and post the answer if I ever get it figured out. Share this post Link to post Share on other sites
mike_va 0 Posted July 6, 2011 Contacted Axis and they got back to me the next day, turns out they have the answer online: http://www.axis.com/techsup/faq/index.php/index_axis.php?action=artikel&cat=0&id=115397&artlang=en&search=ir+cut+flter Works perfectly, Axis has GREAT firmware (and support)! ...unlike some other camera vendors... Share this post Link to post Share on other sites
