iansstud 0 Posted July 5, 2011 Howdy! I bought a LTS LTD2284HMK unit with 4 wired bullet camera w/ IR for $100 on ebay, Ive been trying to get this thing going and am really having a hard time! Here is what Ive done: I installed 2 cameras, hooked up the cat5 to my router Set up my network on the DVR as follows: -dhcp - Media port 9000 -Web Port 88 the dvr saved and rebooted and gave me an IP I clicked on DYNDNS setup (still in dvr menu), and Matched user names/pswd with my DYNDNS.org account. Went to 192.168.1.1 (router setup) clicked on apps and gaming, and created 2 new ports 88 and 9000. I entered the IP the DVR gave me and enabled both ports. I clicked on setup (still in router menu) and clicked on DDNS - Added DYNDNS.ORG info Everything is matching as far as names and passwords go. The router is port forwarding. But for whatever reason It wont load from the internet (outside of my network) Share this post Link to post Share on other sites
iansstud 0 Posted July 6, 2011 ok, I think I got it figured out... I forgot to download the Dynamic DNS software... Now that works!!! I can log in and see the cameras on other systems with IE Next issue... Im trying to get the DVR or at least camera access on my Iphone... Ive downloaded:aplayer zmeyeplus supercam icamviewer netcamviewer nvrviewer athomefree division viewer eagleeyes ivms meye They all ask for my: IP Port User Name Password I enter this, and it just times out... every one! I tried to use my actual IP, My Internal IP, my DDNS.org So hard to get this going!!! Share this post Link to post Share on other sites
chief_lam 0 Posted July 14, 2011 You would need to port forward in order view your cameras remotely. Supercam will work on LTS products. I beleive the mobile port is 100. Share this post Link to post Share on other sites
GeorgiaCCTV.com 0 Posted July 14, 2011 if you port forwarded 88 for http then i found the setup in the super cam to call for the ipaddress:port ie 72.11.66.357:88 hope that helps- steve Share this post Link to post Share on other sites