Cynics DVR-H3140 login problem

[paparaaaapa 0]

Like the title said, i havethe DVR and when i'm trying to access the DVR main menu it pop out a screen and asking me to key in the Device ID and Password, it seems like the Device ID is default 000000 but the password i can get it through, i try 1234, 4321, 000000. can't get it work, is that anyone outside using this model as well so you can share it for me? even i remove the battery and put it on again...still no luck.

[paparaaaapa 0]

http://www.yoguratekindo.com/product.php?id_product=141

the DVR looks like this.

[rory 0]

Have you tried it without a password?

[paparaaaapa 0]

Have you tried it without a password?

yeah, i did. it gave me incorrect password too...

[rory 0]

I found it on the Cynics site, well a H3104 model, but no user manual.

I dont know ... you already tried 000000

Is that the device ID in the DVR configuration?

Maybe try 1111, or 111111 .... or admin for password.

Check the ID in the DVR though to make sure that is correct.

[paparaaaapa 0]

I found it on the Cynics site, well a H3104 model, but no user manual.

I dont know ... you already tried 000000

Is that the device ID in the DVR configuration?

Maybe try 1111, or 111111 .... or admin for password.

Check the ID in the DVR though to make sure that is correct.

i confirm the dvr id is correct and the password using 1111 or 111111 can't work too...

[paparaaaapa 0]

weird thing is that if i am using web based i can access it using password 123456, for normal viewing.

[rory 0]

Make sure the correct port is forwarded for non web based viewing.

This can sometime come back with login errors.

[paparaaaapa 0]

Make sure the correct port is forwarded for non web based viewing.

This can sometime come back with login errors.

it is not the problem on accessing the web-based viewing in IE, the problem now is direct from the DVR itself and i cannot made in through to the main menu

[rory 0]

Yeah but web based would likely use port 80, the desktop software would normally use another port.

[paparaaaapa 0]

Yeah but web based would likely use port 80, the desktop software would normally use another port.

but i did not use pc to access the player, i'm directly connect a monitor on the dvr and checking the dvr on the dvr system itself, will the port thingy affected on this too?

[rory 0]

no .. sorry I thought this was for remote video.

So basically you dont have the local password to get into the configuration?

Will have to wait for someone that knows that DVR then, or see if the manufacturer can help.

[paparaaaapa 0]

it's weird that i can access the web-based using admin as password, but inside the menu on web-based i don't see any option i can adjust the time and date. duh...still no choice but need to access from DVR itself...