Blake CCTV 3 Posted September 7, 2011 Hi I am trying to find a piece of kit that will send 2 video signals down one twisted pair cable. I know this is possible with coax cable if using the correct equipment but i don't know if anyone has made a device for twisted pair. Thanks in advance Richard Share this post Link to post Share on other sites
Soundy 1 Posted September 7, 2011 You could run them into a couple of IP converters and then use a DSL adapter or something similar to send that over the single pair... Share this post Link to post Share on other sites
SDM Group 0 Posted September 7, 2011 Never done it but you may be able to install a balun to convert it to coax and use the Foresight VDS2500 product Share this post Link to post Share on other sites
Blake CCTV 3 Posted September 8, 2011 Thanks guys I was thinking about using a normal coax combiner and then sending the output into a balun and doing the same at the other end, which is what i think you are suggesting SDM group. Soundy: your idea sounds like it could work but would probably be too costly. Share this post Link to post Share on other sites
SDM Group 0 Posted September 8, 2011 Yes, that is what I suggested, be interested to find out how it works out Share this post Link to post Share on other sites