Vivotek camera switching day/night all the time

[Dindihi 0]

Hi,

i bought a Vivotek IP7142 camera, and set Day/Night mode to auto.

I tried to change the Light sensor sensitivity from normal to low and high, but the camera changes all the time from day to night, and back:

 

Sep 7 21:55:19 [iR Cut Control]: Day mode

Sep 7 21:55:22 [iR Cut Control]: Night mode

Sep 7 21:55:34 [iR Cut Control]: Day mode

Sep 7 21:55:37 [iR Cut Control]: Night mode

Sep 7 22:02:29 [iR Cut Control]: Day mode

Sep 7 22:02:32 [iR Cut Control]: Night mode

Sep 7 22:02:42 [iR Cut Control]: Day mode

Sep 7 22:02:45 [iR Cut Control]: Night mode

Sep 7 22:04:20 [iR Cut Control]: Day mode

Sep 7 22:04:23 [iR Cut Control]: Night mode

Sep 7 22:06:29 [iR Cut Control]: Day mode

Sep 7 22:06:32 [iR Cut Control]: Night mode

Sep 7 22:07:32 [iR Cut Control]: Day mode

Sep 7 22:07:36 [iR Cut Control]: Night mode

Sep 7 22:08:02 [iR Cut Control]: Day mode

Sep 7 22:08:06 [iR Cut Control]: Night mode

Sep 7 22:09:14 [iR Cut Control]: Night mode

Sep 7 22:13:07 [iR Cut Control]: Day mode

Sep 7 22:13:10 [iR Cut Control]: Night mode

Sep 7 22:13:24 [iR Cut Control]: Day mode

Sep 7 22:13:27 [iR Cut Control]: Night mode

Sep 7 22:14:25 [iR Cut Control]: Day mode

Sep 7 22:14:29 [iR Cut Control]: Night mode

Sep 7 22:14:46 [iR Cut Control]: Day mode

Sep 7 22:14:50 [iR Cut Control]: Night mode

Sep 7 22:15:34 [iR Cut Control]: Day mode

Sep 7 22:15:37 [iR Cut Control]: Night mode

Sep 7 22:20:02 [iR Cut Control]: Day mode

Sep 7 22:20:05 [iR Cut Control]: Night mode

Sep 7 22:21:50 [iR Cut Control]: Day mode

Sep 7 22:21:54 [iR Cut Control]: Night mode

Sep 7 22:22:11 [iR Cut Control]: Day mode

Sep 7 22:22:14 [iR Cut Control]: Night mode

Sep 7 22:24:03 [iR Cut Control]: Day mode

Sep 7 22:24:07 [iR Cut Control]: Night mode

Sep 7 22:24:44 [iR Cut Control]: Day mode

Sep 7 22:24:48 [iR Cut Control]: Night mode

Sep 7 22:31:09 [iR Cut Control]: Day mode

Sep 7 22:31:12 [iR Cut Control]: Night mode

Sep 7 22:32:38 [iR Cut Control]: Day mode

Sep 7 22:32:42 [iR Cut Control]: Night mode

 

What can i do ?

[skane 0]

Use schedule mode.

The light sensor settings don't seem to make much difference for switching thresholds.

[Dindihi 0]

Yep, that's what i have done now.

But this is not a good solution.