tel346100 0 Posted September 21, 2011 hi i have an avtech cctv system and i view my cameras over the internet (used to anyway) but i forgot the password to my router and had to reset it but i have forgotten how to setup the portforward and can not remember for the life of me on how to do it. i have a netgear wnr2000 router. i have also looked on youtube on how to portforward but it still does not work is there anyone who can help with this pleasssssssssssssssssse if so i would be very grateful .here is a link of the video i watched on youtube http://www.youtube.com/watch?v=g0LhTjQTPz Share this post Link to post Share on other sites
tomahawk 0 Posted September 21, 2011 pull up your browser and enter your router ip enter user name and password you need to go into the port forwarding rules in your router and set them up to the ports you need go into your firewall setings and forward the ports they should match the ports you have entered into your dvr avoid ports 80 and 25 they are most likely blocked by your isp come back and report your progress for more help listing some more info might help dvr type and router type etc. Share this post Link to post Share on other sites
shockwave199 0 Posted September 22, 2011 http://wifi-wiz.net/ Watch all videos there, especially under the advanced section IP cameras. This should help you if you watch and absorb as much as you can. I believe he even covers netgear setup. This guy is great. Dan Share this post Link to post Share on other sites
fa chris 0 Posted September 22, 2011 http://portforward.com/english/routers/port_forwarding/Netgear/WNR2000/WNR2000index.htm complete with step by step pictures. Share this post Link to post Share on other sites
tel346100 0 Posted September 22, 2011 i have a avtech dvr system and i am using a netgear wnr2000 router it is so frustrating cause it worked in the begining now i just cant remember how to do the portfording . do i enter the ip address of the dvr into the portforwarding or do i enter my ip address i got when i went to run and entered cmd just can not figure it out... this how it is set at the moment ive used the ip i got from the dvr system #Server Name Start Port End Port Server IP Address 1 dvr 9000 to 9001 192.168.1.18 2 dvr1 4000 to 4000 192.168.1.18 3 dvr2 80 to 80 192.168.1.18 hope this is ok thanks Share this post Link to post Share on other sites
