smartboy 0 Posted September 25, 2011 Hello, I am stuck; cant seem to get any image via averdigi nano. Averdigi has three imputs IP Camera, Analog and Remote DVR; I have selected IP input. There are three led led lights on the dome video out/network/power all three are lit up green however network led is blinking. The Dome camera came with cables for video/audio out. But I am not using them; co's I've opted for POE. So why is there no footage at all? Share this post Link to post Share on other sites
thewireguys 3 Posted September 25, 2011 do you know the IP address for the NVR and IP camera? Share this post Link to post Share on other sites
smartboy 0 Posted September 26, 2011 do you know the IP address for the NVR and IP camera? I know the ip of NVR but do not know the IP of Camera; there was no CD RoM included in the box, there is also no software download for the camera....I'm surprized that sont does have download section. Any suggestion how I can identify the IP of camera? Share this post Link to post Share on other sites
tomcctv 190 Posted September 26, 2011 Hi. you need software for the sony to input the IP address. and also to do the camera settings. do you know if the camera has been used before ??? you may also have a password problem it might be worth you contacting a sony distributor as this camera also had a software problem and there was a free fix firmware. once you have the ip set on the camera you just insert that into which ever channel is free on your nano and its done. Share this post Link to post Share on other sites
