vmgtlexi 0 Posted September 28, 2011 I was about to buy this camera to replace yet another one of my old cameras. My installed wiring is RG59 for video and 18-2 for power (siamese). I see in the specs for this camera a line item for "UTP interface". Does this have any impact on my desire to hook the camera up with the siamese cable listed above? Or, is a "UTP interface" for something entirely different than video and power transmission? It gave me pause, b/c I thought perhaps "UTP interface" might mean they did away with the standard BNC connector for video and the standard +/- wiring for power. Can anyone shed light? http://www.vitekcctv.com/ProductDetails.asp?ProductID=717 Share this post Link to post Share on other sites
NotoriousBRK 0 Posted September 28, 2011 Based on skimming the manual, that model appears to have the BNC connector cable replaced with a balun-ized cable assembly. You should be able to find the same camera with a regular BNC output. Or, worst-case, put another balun at the camera to convert it from UTP to coax. Share this post Link to post Share on other sites
