colossus dvr lite 4

[podgiekop1 0]

i have a colossus dvr lite 4 problem is i have just upgraded firmware , now remote controls will not work.usually i enter dev 88 enter then green light comes on. before i upgraded in display menu it had dev88 .since upgrade this is now not in new menu thanks in advance for your help

[tomcctv 190]

i have a colossus dvr lite 4 problem is i have just upgraded firmware , now remote controls will not work.usually i enter dev 88 enter then green light comes on. before i upgraded in display menu it had dev88 .since upgrade this is now not in new menu thanks in advance for your help

 

 

 

hi. menu then 12345. and on the screen you will see a new remote number set it back to 88 or any number you like.

 

 

remember you only have a few seconds in which to do this so def 88 enter as fast as you can

[podgiekop1 0]

thanks for your quick reply, i have disabled password so i can go into menu much quicker the problem is that when i press menu and go into display to change number for my ir ,the option is not there anymore. i used to be able to change from 88 to my own number .i have put attachment on of display now ,would anyone have a link for old firmware thanks

[tomcctv 190]

Hi. how old is your dvr ??? there have been 4 colossus units PRO/ lite/ and the latest lite (well 2 years old)

 

the last lite was mouse controlled

 

 

which one do you have .

 

[podgiekop1 0]

im not sure how old dvr is think its older than two years old,i was using remote with this dvr fine before i upgraded. colossus lite 4 dvr

[tomcctv 190]

Hi. does it look the same as the one in the picture ??? or is yours the thin model.

 

did you upgrade to V2.0

[podgiekop1 0]

sorry mate this is my one

[podgiekop1 0]

i did upgrade v.2 digicap it give me two firmwares 1for pro and 1 for lite i d/l the lite one thanks

[tomcctv 190]

i did upgrade v.2 digicap it give me two firmwares 1for pro and 1 for lite i d/l the lite one thanks

 

 

hi that unit is over 5 years old use the pro firmware to get the other screens back. if you are looking to get this unit on the internet via new updates you cant with this unit

 

try V1.6 firmware.

[podgiekop1 0]

ok thanks very much for all your help

[podgiekop1 0]

put the v1.6 firmware on looks like it has bricked all im getting is record light stays on and adata across the screen nothing else

[Groestar 0]

Hi tomcctv.

 

I am wondering if you can help with a copy of the disk or software which came with the old Colossus DVR's, as attached photo. I think this was V1.5 the unit was fitted in about 2008 but the disk has been lost.

 

I you are able to help I will reimburse you as necessary.

 

Thanks.

 

Mike @ Groestar

[tomcctv 190]

Hi tomcctv.

 

I am wondering if you can help with a copy of the disk or software which came with the old Colossus DVR's, as attached photo. I think this was V1.5 the unit was fitted in about 2008 but the disk has been lost.

 

I you are able to help I will reimburse you as necessary.

 

Thanks.

 

Mike @ Groestar

 

 

Hi everything you need is in your PM box