mike_va 0 Posted September 30, 2011 Glass was a little foggy on this one (probably due to outgassing), so took it apart to clean it. Whatever you do, do not use a qtip for the part of the case that the lens looks through. Something in that little ring tears off the fibers, which are then next to impossible to remove. Anyway, not much in there (especially for a TDN). Lens looks like it would be easy enough to swap out. A small packet of silica was in the back part of the case. Share this post Link to post Share on other sites
rory 0 Posted September 30, 2011 wheres the removable IR filter? CMOS, 5mm?? Wow. Share this post Link to post Share on other sites
mike_va 0 Posted September 30, 2011 I guess it's in the black plastic bit. You can see it looking frame by frame when it switches. Wow I did not even realize it was cmos, somehow it does as well or better at night than a lot of ccd types I have around here at night (with the exception of those cnb's you used to be so fond of). Share this post Link to post Share on other sites
