joaomw 0 Posted October 5, 2011 I use the ltc0498 for application of ANPR. However I am having problems with image quality compared to 0495. the image of 0498 seems less than that of 0495. Anyone have any configuration used for this type of application? I'm in Brazil ... Excuse my English. Share this post Link to post Share on other sites
timbo 0 Posted October 25, 2011 You'll have to be more specific ... First off, you should probably be using an ANPR camera like a REG-X-16 There are many settings to configure ... increase the shutter speed, WDR, BLC (not to be used together) etc ... Use the '24 hour' profile, which should be profile 1, 'Traffic' profile (2) is good for compensation bright lights with WDR, but slows the shutter speed down. I suggest too much without know the current settings/problems. Share this post Link to post Share on other sites