haku123 0 Posted October 5, 2011 i have this dvr: http://www.clintonelectronics.com/store/product.php?productid=289&cat=70&page=1 i am trying to connect on a local lan but its not working for some reason and i dont know what i am doing wrong. this is what i do: -connect Ethernet cord to both the dvr and the pc -open up IE and type in the address 10.1.3.216 things to keep in mind: -this used to work before but i messed around with the settings and now it doesnt work -my pc is not connecting to any router or modem. i has no internet at all - i tried loading default but that didnt seem to solve the issue any ideas what the problem might be? Share this post Link to post Share on other sites
Soundy 1 Posted October 5, 2011 What is your PC's IP address? Share this post Link to post Share on other sites
haku123 0 Posted October 6, 2011 i went on cmd and typed in ipconfig and it says everything is disconnected Share this post Link to post Share on other sites
Soundy 1 Posted October 6, 2011 Check your network cable - if you're connecting directly between computer and DVR, you may need to be using a crossover cable. If the cable is good, check inside the network ports of both machines, make sure there are no bent pins. Share this post Link to post Share on other sites
chaz 0 Posted October 6, 2011 have you given the dvr the static address of 10.1.3.216? if so, give the computer a static address of 10.1.3.215 and using a ]crossover cable you should be able to connect. try to ping the dvr to check the settings and crossover cable Share this post Link to post Share on other sites
haku123 0 Posted October 6, 2011 thanks!! its working now Share this post Link to post Share on other sites