Power Supply Suggestion for 16 channel 12VDC

[ulterior_motive 0]

Hey guys, need 1 more suggestion

 

bought 16 CNB cameras rated at 12VDC EACH,

 

http://www.cnbusa.com/en/html/product/product.php?seqx_prod=1164

 

they are NOT 12VDC/24VAC

 

http://www.altronix.com/index.php?pid=2&model_num=Sav18D

 

or

 

http://www.altronix.com/index.php?pid=2&model_num=Sav182D

 

Altronix was suggestion from day 1 so im going to stick to it, will this PSU work for me???

[Securame 0]

Both PSUs should work, each camera needs max. 180mA, so even the 5A 18 output model should be enough. If you have many long cable runs, or if the price difference is not too much, I would take the 11A model.

[CCTV_Suppliers 0]

Has anyone suggested B-tron power supplies? - http://www.b-tron.com/versamain.html

 

Same specs, same life time warranty and better pricing than Altronix..

 

I have been using both Altronix and B-tron equal basis.. Some customer prefer Altronix and others B-tron.

 

B-tron actually sells more with OEM manufacturers under different names.

 

Both are great manufacturers and offer excellent support.

[Ken Layton 0]

Some power supply boxes can use the Mean Well model S-150-12 single output (it has a screw terminal strip) 12 volt @ 12.5 ampere enclosed switching regulator power supply. It is also sold by Jameco Electronics as their stock number 123423 for $34.95

 

It is UL approved.

[fa chris 0]

Either will work just fine.

 

I've had a lot of good luck with altronix, things are pretty much rock solid.

 

The meanwell supply will work too (and be rock solid), but I'd put it in some type of can with terminal strips to break out your circuits.