JonTebo 0 Posted October 8, 2011 I have a problem. Im trying to setup a Luxor dvr for remote access and the install cd that came with the system has been lost. Ive contacted Luxor support for help. But according to the tech i spoke with the software was lost when the offices the software was lost from point a to point b. This is a older dvr so this is not available from the help website... Any suggestions short of buying a new dvr would be helpful Share this post Link to post Share on other sites
tomcctv 190 Posted October 8, 2011 Hi same unit as the old deltawave / dahua. there has been no support for I.E for a long time. you need software to view your system. if you have a VCR connected then recording is fine. you could look at a encoder fitted to the TV/ monitor out to just view your cameras over the internet. Share this post Link to post Share on other sites
JonTebo 0 Posted October 9, 2011 I was more or less looking for the software but its been hard to track down Share this post Link to post Share on other sites
