How to connect CNB VBM-24VF to BNC Cable?

[MikeInTampa 0]

What is the best way to connect a CNB VBM-24VF power cable to the power side of a BNC cable (see attached image)? Where is the best place to purchase/order such parts?

[SEANHAWG 1]

No special way of doing it, you just basically hard wire the wires directly into the 2 inputs on that green thing.

[Old Car Guy 0]

The green connecter looks like a 24V connecter to me. If you’re asking how to connect the 24V wire, all you have to do is strip about a quarter inch of the positive and negative sides of the wire coming form the power supply and push them into the holes. If the camera is 12V be sure to connect the positive on the positive coming from the power supply and the negative to the negative.

[rory 0]

That camera is not polarity sensitive for 12VDC or 24VAC so you can connect the red and black power wire to either side of the terminals on that green jack.

[MikeInTampa 0]

Thank you all! It seemed to easy.