simyf 0 Posted August 8, 2005 Hi All, Is there a converter that can convert VGA signal to BNC so the DVR can do recording? Basically, what i want is split the VGA signal from one critical PC, one go to PC Monitor the other one need the VGA to BNC converter and connect to coaxial cable to DVR board so I can perform recording on what ever thing display on the monitor... please advice. Thanks Share this post Link to post Share on other sites
rory 0 Posted August 8, 2005 use the RCA or Svideo output from the Video card. Use an adaptor to convert it, such as either a Svideo-RCA adaptor (requires 1 Svideo cable and 1 RCA cable) if the video card only has an Svideo output, and a RCA-BNC adaptor. Or if it is RCA output then just use a RCA cable with a RCA-BNC adaptor. Most cards like the ATI Radeon and GEForce AGP cards, can do this. Ive noticed the GEforce mostly had Svideo while the ATI had RCA. The cards Im talking about are standard 64-128MB AGP video cards. Set it up for dual monitor, also make sure to install the full drivers and software to enable the monitor options. Without the full drivers and software they still will work to the output, but only if there is no PC monitor attached. Rory Share this post Link to post Share on other sites
