luks 0 Posted October 27, 2011 Hi to all, i need help with this, if any can help me thanks a lot. The Problem: When insert the GV800 4ch pci card into the motherboard DH61CR the post secuency play error (Two long beep = error video) any idea? The same card in another oldest motherboard work fine, Any pci device in the DH61CR pci slot work fine, one GV800 pci express in DH61CR pcie x1 slot work fine. The computer doesnt have Video card, only the onboard video. Ok thanks for read this, any help is welcome. Luks from Argentine PD: sorry for my english!!! Share this post Link to post Share on other sites
VirtaNi 0 Posted October 30, 2011 Conventional PCI Revision 2.3 Revision 2.3 makes a significant step in migrating the PCI bus from the original 5.0 volt signaling to a 3.3 volt signaling bus. Revision 2.3 supports the 5V and 3.3V keyed system board connectors (as did revision 2.2) but revision 2.3 supports only the 3.3V and Universal keyed add-in cards. The 5V keyed add-in card is not supported in revision 2.3. revision pci on Intel DH61CR do not supports the 5V GV800 4ch pci need 5v tested mobo with 5v support http://amax-sb.ru/forum/14-56-1 Share this post Link to post Share on other sites
