AndyA 0 Posted November 6, 2011 Hello can any suggestion on the video from camera 4 they always mothion on it I am think maybe the Ir lights cause the issues? here is Screen shot video with dot in camera 4 IT record all time the dot do not existed during the day only night I am sure they ir lights Suggestion? The Camera face ground in atempted to capture lincse plates Not my setup but if was make stop montion record get rid dot that that be great Share this post Link to post Share on other sites
ljarrald 0 Posted November 8, 2011 it seems like when the IR lights kick in they pull too much power and the camera is underpowered... Share this post Link to post Share on other sites
AndyA 0 Posted November 10, 2011 Hello ljarrald I would'nt think it was the camera are rated for 12 760 with ir run is maybe 20 ft for that camera other one have no issue ? Shot ir? Cause camera fine in the day Share this post Link to post Share on other sites
SEANHAWG 1 Posted November 10, 2011 Its probably the noise from the picture that is kicking on the motion detection. This is a frequent problem for nighttime shots Share this post Link to post Share on other sites
ljarrald 0 Posted November 10, 2011 if your DVR has a macro feature you can set it so the sensitivity is automatically reduced at night, this is what i've done. Share this post Link to post Share on other sites
tomcctv 190 Posted November 10, 2011 Its probably the noise from the picture that is kicking on the motion detection. This is a frequent problem for nighttime shots I would'nt think it was the camera are rated for 12 760 with ir another problem with noise. and you find with VF cameras is you have taken the zoom out past the IR range of the camera Share this post Link to post Share on other sites
