doo600 0 Posted November 14, 2011 I have a professionally installed SPECO camera system in the house which works fine. It has two ASKA RFDM-3 modulators attached to a 8 camera Speco 1tb DVR. Currently the signal goes to 2 TV's that you turn to the channels and you get the image. I would like this to go to 2 more TV's. Can I just split the outgoing coax cable after the modulator? Speak slowly and with easy words. I'm not very familiar with these systems. Thanks Share this post Link to post Share on other sites
Soundy 1 Posted November 14, 2011 Can I just split the outgoing coax cable after the modulator? Speak slowly and with easy words. I'm not very familiar with these systems. Thanks Yes, although if there are already TVs there with working cable, you may want to run your modulator feed back to before the existing split that goes out to all the TVs. Share this post Link to post Share on other sites
doo600 0 Posted November 14, 2011 Can I just split the outgoing coax cable after the modulator? Speak slowly and with easy words. I'm not very familiar with these systems. Thanks Yes, although if there are already TVs there with working cable, you may want to run your modulator feed back to before the existing split that goes out to all the TVs. So how do I add the modulator coax into the satellite coax? Share this post Link to post Share on other sites
