Jibbeh 0 Posted November 24, 2011 Looking to do a favour for a client of ours that has one of these units, about 3-5 years old. Checked their WAN setup and it has a few ports (i think) forwarded to the DVR, all of which were in the 5000ish range. None of them load in a browser window so I'm guessing its a dedicated software type of thing. Any ideas what i should be looking for? What it costs and where we could get it in UK? Share this post Link to post Share on other sites
valboosky 0 Posted November 25, 2011 You have to use a software called Network Client for Remote Viewing. Every Intellex comes with 1 user license for this software. In order to view this from a web page. The Intellex needs to be running version 4.1 or higher. Regards, Share this post Link to post Share on other sites
tip_ex 0 Posted March 7, 2012 You are partially correct. In order to view an older Intellex (4.0 and lower), the Browser Client Software needs to be installed on a dedicated computer that will act as webserver. Then your IE will be able to connect to an old Intellex. Note: Some setup can't upgrade from 4.0 to 4.1 due to access control integration. So Browser Client is the solution. You have to use a software called Network Client for Remote Viewing.Every Intellex comes with 1 user license for this software. In order to view this from a web page. The Intellex needs to be running version 4.1 or higher. Regards, Share this post Link to post Share on other sites
tip_ex 0 Posted March 7, 2012 The 500x ports are for the Network Client software. The port 80 (default) needs also to be forwarded. hope it helps. Looking to do a favour for a client of ours that has one of these units, about 3-5 years old. Checked their WAN setup and it has a few ports (i think) forwarded to the DVR, all of which were in the 5000ish range. None of them load in a browser window so I'm guessing its a dedicated software type of thing. Any ideas what i should be looking for? What it costs and where we could get it in UK? Share this post Link to post Share on other sites
sebastian-aceedo 0 Posted November 15, 2013 Hola! es que tengo un problema con un domo American Dynamics es que me da un error y no lo puedo mover con el controlador, el error dice: verificacion tipo de red y no se como hago para que se mueva Share this post Link to post Share on other sites