Jump to content
atoledo

Comments on this new setup please

Recommended Posts

OK. After many hours of research (and many contradictory reviews), I've decided on what I'm going to get for the front yard.

 

(see here for some background: http://www.cctvforum.com/viewtopic.php?p=171855)

 

I am mostly concerned about recording at night. I do have a 3-post lamp with 25W in each which gives a nice glow to the front during the night, plus a wall lamp by the door, so I am not going for an IR camera. I can always put in stronger bulbs if needed.

 

The area I want to record is approx. 20 x 25. I have chosen to go with the CNB VCM-24VD ($150) and the Qvis ZUESMK2 4 Channel DVR ($250). What do you guys think of this setup?

 

Also, since I'm new to all of this, and I'm used to having everything included in the box, what wires will I need and how much more am I looking at?

 

Thanks

Share this post


Link to post
Share on other sites

Good choice of camera... not familiar with the DVR.

 

Beyond that, you'll need cable, connectors, power supply, and monitor.

 

For cables, you can use either UTP (Cat3/5e/6) with baluns, or coax+18/2 Siamese, whichever is easier to get ahold of. If you go coax, make sure to use RG59 or RG6, solid-copper center conductor with braided copper shield.

 

If you go with UTP, I suggest these baluns:

blnmtl2-1.jpg

 

...cost-effective (can be found online for $5/pair), work well, and fit inside the VCM back-box.

 

For a power supply, just about anything you find will work with these cameras - they'll run on anything from 12-30V, AC or DC, and need less than 500mA.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×