luappic 0 Posted December 6, 2011 Hi all I have a couple of DM sprites dvtu's i think that have faults onthe main board, A chap on ebay claims he changegs common fault components on the pcb before he sells does anyone know what these faults are? any help would be nice and if anyone has any ideas dont mind getting meter and scope out to try and find thx Share this post Link to post Share on other sites
Ken Layton 0 Posted December 6, 2011 I would think the most common fault would be blown electrolytic capacitors. Share this post Link to post Share on other sites
luappic 0 Posted December 6, 2011 Thx for reply Ken was thinking same area lots of sm 10uf on might see if can blow them of and replace thanks again and will read caps as replace if find anything intresting will post Share this post Link to post Share on other sites
luappic 0 Posted December 12, 2011 Just a quick update in case anyone intreasted i have changed all the 10uF caps also near the HDD supplys and regs i have changed the 47uF and 100uF turned unit on on friday and touch wood is fine used a rework station hot air at 470 c to blow caps off would'nt attempt with iron Share this post Link to post Share on other sites
Ken Layton 0 Posted December 13, 2011 Glad it's running. Let us know how it holds up or if it still gives you any trouble. Share this post Link to post Share on other sites
