lselfstorage 0 Posted December 10, 2011 Hello, I can't seem to fix this item....anytime a motion event is captured, I get 3 emails for each event. Each e-mail has slightly different content - I just care about the 1 e-mail with the snapshot. How do I turn off the other two? Example 1: Alarm event: Motion Detect Alarm input channel No.: 4 Alarm device name: localhost Sender IP address: 192.168.0.251 (This has the attachment, I want to keep these types of e-mails) Example 2: Alarm event: Motion Detect Alarm input channel No.: 4 Alarm start time(D/M/Y H:M:S): 10/12/2011 7:3:37 Alarm device name: localhost Sender IP address: 192.168.0.251 Example 3: Alarm event: Motion Detect Clear Alarm input channel No.: 4 Alarm stop time(D/M/Y H:M:S): 10/12/2011 7:4:8 Alarm device name: localhost Sender IP address: 192.168.0.251 All of these are tied to the same event - any ideas? Share this post Link to post Share on other sites
joseph.chen0312 0 Posted December 10, 2011 Hi you should check your set up or does it bridge DNS/DDNS. You knwo sometimes if you have key in one or both it would be send you two or more mail to you. If you still can not shoot would you mind gibe me your IP and admin and pass words, I thin kI could help you re programble. Share this post Link to post Share on other sites
SEANHAWG 1 Posted December 10, 2011 U will get 1 when the event starts. A snapshot. And 1 when it ends. A total of 3 per event. Share this post Link to post Share on other sites
houli 0 Posted January 12, 2013 PLEASE HELP!, i have this dvr: http://www.pcplay.com.pe/index.php?route=product/product&product_id=131 and works with the DAHUA 3104 firmware. (i downloaded it and upgraded and works fine) but it doesn´t send snapshot to the mail, it only sends the same info ISELFSTORAGE told: Alarm event: Motion DetectStart Alarm Begin Time: 2012-12-22 14:36:11 Alarm input channel No.: garage(4) Alarm device name: HouliSecurity Sender IP address: 192.168.1.10 the manual that came with it shows photos of the "snapshot settings" but these options don´t appear in the dvr. Is there a way to upgrade with a firmware that allows this snapshot/mail function? MANY MANY THANKS! Share this post Link to post Share on other sites