myplace46 0 Posted December 20, 2011 Am I correct in assuming that just because a camera is called an "IP" camera doesn't necessarily mean its a digita cam like a 1.3 or higher pixel rating? Some of the advertisements I read arwe a little confusing. Thanks, John Share this post Link to post Share on other sites
Soundy 1 Posted December 20, 2011 IP is the transport protocol a network camera uses. The term is often used interchangeably with "MP" (megapixel), but you're correct, an IP camera isn't necessarily megapixel. Many manufacturers have lower-resolution (such as VGA, or 640x480) cameras that use IP rather than NTSC/PAL analog signals to send their video. There are some advantages to this, particularly if you're already using a number of IP cameras but need some advantages of a few lower-resolution cameras (better low-light performance, lower cost, etc.), but for the most part, IP is used primarily because analog video has a limit to the resolution it allows. Share this post Link to post Share on other sites
myplace46 0 Posted December 20, 2011 IP is the transport protocol a network camera uses. The term is often used interchangeably with "MP" (megapixel), but you're correct, an IP camera isn't necessarily megapixel. Many manufacturers have lower-resolution (such as VGA, or 640x480) cameras that use IP rather than NTSC/PAL analog signals to send their video. There are some advantages to this, particularly if you're already using a number of IP cameras but need some advantages of a few lower-resolution cameras (better low-light performance, lower cost, etc.), but for the most part, IP is used primarily because analog video has a limit to the resolution it allows. Thank you Matt, That's what I thought. I appreciate you helping figure through all this maze. John Share this post Link to post Share on other sites